Flat Roof Repair in Dallas, TX
Flat and low-slope roofs fail differently than pitched residential roofs - and diagnosing the failure requires a different process. Water entry on a flat roof can originate from a seam failure, penetration deterioration, drain compromise, or perimeter flashing failure, and the visible interior staining rarely appears directly below the true entry point.
City Roofing Company repairs flat roofs across Dallas using a systematic diagnostic process - including electronic leak detection on commercial systems - that identifies the actual source rather than patching where the symptom appears.
TPO Seam Repair
Heat-welded seam restoration on single-ply TPO systems - the most common flat roof failure point in Dallas's thermal cycling climate.
EPDM Patch Repair
Vulcanized or adhesive patch repairs on EPDM rubber membrane systems, addressing punctures, tears, and seam adhesive failures.
Drain & Scupper Repair
Drain collar resealing, clogged drain clearing, and scupper repair to restore proper drainage and eliminate ponding water.
HVAC Curb Resealing
Restoration of weathered sealant at rooftop HVAC unit bases - one of the most common flat roof leak sources in Dallas commercial buildings.
Penetration Resealing
Pipe boot, vent collar, and conduit penetration resealing with commercial-grade materials rated for UV resistance in Texas sun.
Electronic Leak Detection
ELD scanning to precisely map moisture infiltration beneath flat roof membranes without destructive testing.
Flat Roof Repair in Dallas - Why the Right Diagnosis Matters
The most common flat roof repair failure we encounter in Dallas isn't poor workmanship - it's incorrect diagnosis. A patch applied to where staining appears on the interior ceiling rarely stops the leak, because flat roof leaks almost never enter directly above where they're visible. Water travels laterally under the membrane, along insulation, and across decking until it finds an exit point that may be several feet from where it entered.
Our ELD-equipped commercial team maps infiltration locations on the roof surface before proposing any repair scope. This approach produces repairs that actually stop leaks rather than temporarily obscuring them - and it limits repair scope to the actual failure areas rather than treating a larger area speculatively.
Service Areas in Tarrant County
Frequently Asked Questions
Recurring leaks in the same interior location almost always indicate that previous repairs addressed symptoms rather than the actual entry point. Water travels along decking and framing before appearing where you see it - sometimes many feet from the true source. Our leak detection process traces the entry point on the roof surface, not just where the staining appears below.
We repair TPO single-ply membrane, EPDM rubber roofing, modified bitumen, built-up roofing (BUR), and spray polyurethane foam systems. Each requires different diagnostic and repair approaches, and our commercial team has experience across all flat roof types common in the Dallas market.
For flat roofs, we use electronic leak detection (ELD) - a specialized device that identifies moisture beneath the membrane without requiring destructive testing. This allows us to map infiltration points precisely and limit repair scope. We also use systematic visual inspection of high-probability failure locations: seams, penetrations, drains, and perimeter flashings.
If the membrane is structurally sound - no widespread ponding, insulation with acceptable moisture content, functional seams - a coating system that extends roof life 10-15 years at 40-60% of replacement cost may be the most economical path. We core-sample commercial roofs before proposing coatings to confirm the substrate is appropriate.
Dallas Flat Roof Repair - Get a Free Commercial Assessment
Fort Worth's trusted roofing experts since 1964. No pressure, no obligation - just an honest assessment from a family-owned team that treats you right.
Mon-Fri 8 AM-5 PM · Saturday by appointment · 100% satisfaction guaranteed